Nevco Engineers Pvt. Ltd.

Leak Detectors

Ultraprobe 100

The Ultraprobe® 100 is a practical tool for any leak detection, steam trap inspection or troubleshooting program. Simple to use & cost effective!
Find compressed air and faulty steamtraps and prevent machinery failure. The Ultraprobe® 100 features an 8-position sensitivity dial with decibel indications. In addition, it features an LED bar graph display in which each LED equals approximately 3 dB for calculating decibel levels.

  • Easy to use
  • Best in class entry level Ultrasound instrument!
  • Comes with an universal interchangable 9V battery
  • deally for point & shoot trouble shooting

UP100KT-P: ULTRAPROBE 100 KIT

UP100 pistol housing with LED bar graph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, stethoscope module, warble tone generator with battery recharger, Deluxe noise attentuating headphones, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual.

Construction: Hand-held ABS pistol type ultrasonic processor, stainless steel sensor enclosures
Circuitry: SMD/Solid State hybrid heterodyne receiver
Frequency Response: Peak response: 36-44 kHz
Indicator: 10 segment LED Bar Graph (red)
Sensitivity Selection: 8 position precision attenuation
Power 9 Volt Alkaline Battery
Low Battery Voltage Indicator LED
Headset Noise isolating type: Double headset wired monophonic. Impedance, 16 ohms. Over 23 dB of noise attenuation. Meets or exceeds ANSI specifications and OSHA standards. For hard hat use.
Probes Scanning Module (SCM-1), Stainless Steel Unisonic (single transducer) piezo electric crystal type;
Stethoscope/Contact Module (STM-1), Stainless Steel plug-in type with 14 cm (5.5″), Stainless Steel Waveguide
Rubber Focusing Probe Shields stray ultrasonic signals and focuses detected signals
Transmitter Patented warble tone transmission
Respons time Response time: 300 msec
Ambient Operating Temp.Range 0 – 50 °C (32 °F – 120 °F)
Relative Humidity 10-95% non-condensing at up to 30 °C (86 °F)
StorageTemperature 18 °C – 54 °C (0 °F – 130 °F)
Warranty 1-year parts/labor standard, (details available on request) 5 years with completed warranty registration card
Dimensions 13.3 x 5 x 20.3 cm (5.25″ x 2″ x 8″)
Weight 0.3 kg (11 oz)
Carrying Case Nylon Cordura soft carrying case
scroll up
scroll up