Nevco Engineers Pvt. Ltd. 90 A, 2nd Floor, Opposite Iskon Temple, Amritpuri, B Main Road, East Of Kailash, Delhi - 110065
Hot Line: +91-9999946668

CEMS Supplier in Kochi


CEMS Supplier in Kochi (Cochin): Continuous Emission Monitoring Systems

Kerala asks more of a CEMS than most states. Under the Kerala State Pollution Control Board’s online monitoring framework, an analyser must carry type approval, report digitally to the Board’s central server, raise an alarm when anyone changes its configuration or calibration, and pass a validation test against manual sampling before its data counts. For the refinery at Ambalamugal and the fertilizer, chlor-alkali and chemical units of Eloor-Edayar, a CEMS supplier in Kochi has to meet that checklist, not just deliver a working analyser.

Nevco Engineers has 44 years in environmental instrumentation, dating from 1982. We supply four stack gas analysers, System 400, AR650, AR602Z and LD500, and select them against both the gases in your consent and the Board’s requirements.

In short: In Kerala, a CEMS must be type-approved, connected, tamper-alerting and validated against manual sampling. Nevco helps Kochi plants choose an analyser that fits the gases and the rules, connects it to Kerala PCB and CPCB, and supports remote calibration and AMC.

Talk to our CEMS team: +91-9999946668 | sales@nevcoengineers.com | Request a Quote

Who Kerala PCB's Online Monitoring Covers

Units in CPCB’s 17 highly polluting categories, along with common biomedical and hazardous waste incinerators, were already required to monitor continuously. The Kerala PCB framework, summarised by Lexplosion in March 2022, extended coverage as a first step to:

  • Red category industries with capital investment of ₹10 crore or more
  • Orange category industries with capital investment of ₹15 crore or more
  • Steel process industries, whatever their investment
  • Hospitals with more than 500 inpatient beds
  • Apartment and commercial projects that need Environmental Clearance
  • Sewage and effluent treatment plants of 100 KLD or more

Deadlines were phased: 31 August 2022 for the 17 categories and units already instructed, 31 December 2022 for other red category units, and 30 June 2023 for other orange category units. A covered unit in Kochi should therefore already be reporting, and any new or expanded unit has to connect from the start.

For hospitals, housing projects and treatment plants, the requirement is mostly about effluent, which Nevco covers through effluent and STP monitoring. Stack gas monitoring matters most for the industrial units.

Kerala's CEMS Checklist, and How We Meet It

Kerala PCB requirementWhat it means in practiceHow Nevco responds
Direct, continuous 24×7 measurementThe analyser reads pollutant concentration itself, around the clockAll four analysers measure continuously; the LD500 measures in situ with no sample extraction
Type approval from the Indian scheme or USEPA, TÜV or MCERTS, verified on the certifier’s websitePaperwork matters as much as performanceThe AR650’s page lists a TÜV test report to EN 15267 (QAL1), MCERTS and CSIR-NPL verification; for other analysers we confirm documents before quoting
Installed to CPCB norms using a CPCB-approved principleMeasurement method and installation must follow CPCBStack survey and installation planned to CPCB requirements
Digital communication to a remote computerData must flow automatically to the Board’s serverNEVCO NV-LX logger built to the CPCB communication protocol, over Ethernet or 4G
Remote calibration supportedThe Board accepts calibration run remotelyNevco has delivered System 400 analysers with a remote calibration facility
Alarm on any configuration or calibration changeTampering, or an unlogged change, is flaggedConfigured during server integration; confirm the Board’s current format with us
Validation against manual sampling within CPCB accuracyData counts only after it matches lab resultsWe plan commissioning so the analyser is calibrated before the Board’s validation visit
Low operation and maintenance, low consumablesRunning cost is a stated criterionCross-stack and in-situ designs avoid sample conditioning systems

Kochi's Stacks by Zone

Eloor-Edayar along the Periyar

Fertilizer, chlor-alkali, sulphuric acid, rare earth and chemical units have shared this stretch of the Periyar for decades, beside dense housing. Stacks here carry SO₂, NH₃, HCl, Cl₂ and HF, often in wet, corrosive gas.

Ambalamugal refinery and petrochemical zone

BPCL’s Kochi Refinery at Ambalamugal lists benzene, toluene and propylene among its specialty products, and petrochemical units have grown around it. Process stacks and fired heaters carry SO₂, NOx, CO, and hydrocarbons.

  • AR650 multi-component analyser for long gas lists, with benzene, toluene, xylene and total hydrocarbons among its parameters, and the certifications Kerala looks for
  • System 400 in its 400CS or 400BASIC configuration for heaters and boilers

Our Global Partners

Nevco’s clients include Reliance, Tata Power, Indian Oil, HP, ONGC, GAIL, NTPC, BHEL, Adani, Essar, Hindalco, Vedanta, Jindal, NALCO, SAIL, IFFCO, UltraTech, ACC, Aditya Birla Group, Aarti Industries, Hikal, SRF, Dr. Reddy’s, Hindustan Unilever, Saint-Gobain, Maruti, Toyota, Honda, MRF, Goodyear and Wipro.

Pollution control authorities rely on Nevco too: CPCB, DPCC, TNPCB, PPCB, the MP Pollution Control Board and the Goa State Pollution Control Board are among our clients as well.

Kakkanad and the port area

IT parks, the special economic zone, the shipyard, the LNG terminal, and container berths have fewer process stacks. Boilers and captive power units are the usual CEMS candidates, and their KSPCB consent decides. Many units here fall under the framework for effluent rather than stack gases.

Nevco Work Relevant to Kochi

Nevco’s projects do not yet include a stack installation in Kerala. These are the closest matches:

  • Sulphuric acid plant. Gas-phase SO₂ measurement across a 0 to 20% range, matching acid production in the Eloor-Edayar belt.
  • Tata Steel Long Products, Joda. Three System 400 online SO₂ analysers with a remote calibration facility, the capability Kerala’s framework allows.
  • Petcoke calciner and carbon plant. System 400 measuring SO₂, NOx and NH₃ in corrosive gas with more than 40% moisture.
  • GAIL, Gandhar. Optical CEMS by UV-DOAS for waste incineration.
  • SRF and Birla Corporation. Stack monitoring of SO₂, NOx and particulates.

In Kochi’s main sectors, Nevco’s client list includes refining and gas companies Indian Oil, HP, Reliance, ONGC, GAIL and Oil India, and fertilizer makers IFFCO and SPIC.

The company is certified to ISO 9001:2015 and ISO/IEC 27001:2013, holds a Best MSME Award, and works with principals including OPSIS, Sintrol and KANE. More than 10,000 of its flue gas analysers are installed across India.

Wet Stacks, Wet Seasons

Kochi gets rain from both the southwest and northeast monsoons, and many of its stacks leave wet scrubbers. Moisture condenses in sample lines and carries acid with it. The LD500 avoids sample lines entirely, and System 400 has run on gas with more than 40% moisture. On System 400 and AR650, the analyser links to the stack optics by fibre, so it can sit in a dry shelter away from the platform.

Stack gases are only one duty. Particulates need stack dust monitoring, and boundary air needs a continuous ambient air quality monitoring system. Data from all of them can reach Kerala PCB and CPCB through our IoT-CPCB connectivity.

How a Kochi CEMS Project Runs

  1. Consent and coverage check. We confirm whether your unit falls under the framework and which stacks and gases apply.
  2. Analyser and documents. We match analysers to the gases and confirm the type-approval papers Kerala PCB will ask for.
  3. Installation and integration. We install, calibrate and connect the system to Kerala PCB and CPCB servers.
  4. Validation support. We prepare the system for the Board’s comparison with manual sampling.
  5. AMC. Calibration, servicing and breakdown support continue under contract.

Request a CEMS Proposal for Your Kochi Plant

  1. Send your Kerala PCB consent and a list of stacks.
  2. We recommend analysers and list the certificates that come with them.
  3. You receive an itemised quote for equipment, installation, server connectivity, validation support and AMC.

We are open from Monday to Saturday 10:00 AM - 06:00 PM

Frequently Asked Questions.

Have questions about our systems, compliance requirements, or service offerings? We’ve answered the most common ones here.

What is Kerala PCB's online emission monitoring system?

It is the Kerala State Pollution Control Board’s framework for online continuous effluent and emission monitoring. Covered units must install analysers that report continuously to a central server, with alerts, remote calibration and validation against manual sampling.

The 17 highly polluting categories, waste incinerators, red category units investing ₹10 crore or more, orange category units investing ₹15 crore or more, and all steel process industries. Large hospitals, EC projects and big STPs are covered too, mainly for effluent.

No. The analyser needs type approval from the Indian scheme or from agencies such as USEPA, TÜV or MCERTS, and the certificate must be verifiable on the certifier’s website.

The AR650. Its page lists a TÜV test report to EN 15267 (QAL1), MCERTS and CSIR-NPL verification. For other analysers, Nevco confirms the available documents before quoting.

After installation, the Board compares manual sampling and analysis with the analyser’s real-time values. If they fall within CPCB’s prescribed accuracy, the system passes. If not, it must be recalibrated.

Yes. The framework supports remote calibration, and the analyser must alert the central server whenever calibration or configuration changes. Nevco has delivered System 400 analysers with remote calibration.

Typically SO₂, NH₃, HCl, Cl₂ and HF, depending on the process and consent. The AR602Z measures all of these together, and the LD500 suits sticky ammonia and HCl.

The AR650 for process stacks with long gas lists, including benzene, toluene, and total hydrocarbons, and System 400 for heaters and boilers measuring SO₂, NOx, and CO.

We take on CEMS projects in Eloor, Edayar, Ambalamugal, Kakkanad, the Cochin port area and other industrial zones around Kochi, with AMC support after commissioning.

Send your Kerala PCB consent, the stacks and gases to be monitored, and site power and network details. We quote for analysers, installation, connectivity, validation support, and AMC.