Nevco Engineers Pvt. Ltd. 90 A, 2nd Floor, Opposite Iskon Temple, Amritpuri, B Main Road, East Of Kailash, Delhi - 110065
Hot Line: +91-9999946668

CEMS Supplier in Raipur


CEMS Supplier in Raipur: Continuous Emission Monitoring Systems

The Chhattisgarh Environment Conservation Board (CECB) has stopped warning and started acting. In the 17 months to May 2026, its Raipur regional office ordered 82 industries to close or have their power disconnected and imposed more than ₹2.4 crore in environmental compensation. For the sponge iron, steel, ferro alloy, power and cement plants of Siltara, Urla, Borai and the Baloda Bazar belt, a CEMS supplier in Raipur has to deliver stack data that is accurate, connected and defensible on the day an inspector arrives.

Nevco Engineers has worked in environmental instrumentation for 44 years, since 1982. We supply four stack gas analysers, System 400, AR650, AR602Z and LD500, and size each one to what your CECB consent actually asks for.

In short: CECB is enforcing hard, and its data network sees which analysers stay connected. Nevco fits Raipur’s kilns, furnaces, boilers and cement stacks with the right gas analyser, connects them to CECB and CPCB, and keeps them running under an AMC.

Talk to our CEMS team: +91-9999946668 | sales@nevcoengineers.com | Request a Quote

CECB's Record, January 2025 to May 2026

According to The Hitavada, surprise inspections by CECB’s Raipur regional office across Raipur, Baloda Bazar-Bhatapara, Dhamtari, Mahasamund and Gariaband districts led to:

  • 94 polluting industries issued notices
  • 82 industries directed to close or have their electricity disconnected
  • ₹2,40,65,125 in environmental compensation on 96 industries
  • ₹51,02,323 on 136 industries and institutions for moving material and waste without covers
  • ₹12 lakh on two industries for unauthorised transport and dumping of fly ash

The board said strict action against violators will continue.

Raipur's Stacks, Duty by Duty

Plant typeWhereGases usually in the consentOur starting point
Sponge iron kilnsSiltara, Urla, BoraiCO, SO₂ (particulates first)System 400 in its 400BASIC configuration
Ferro alloy furnacesSiltaraCO, SO₂System 400 (400BASIC)
Captive power boilersSiltara and across the beltSO₂, NOx, CO, CO₂, mercury where requiredSystem 400, with the 400HWE for mercury
Cement kilnsBaloda BazarSO₂, NOx, CO, mercurySystem 400 or AR650
Cement kilns co-processing wasteBaloda BazarHCl, HF and total hydrocarbons, in addition to the aboveAR650, which lists all of these
Ammonia or acid gas ductsProcess and pollution control unitsNH₃, HCl, HFLD500, or AR602Z where several gases share the stack

A point we make to every Raipur buyer. Many sponge iron, induction furnace, and rolling mill units are regulated mainly on particulates. If your consent names dust first, a stack dust monitoring system is the priority, and a gas CEMS should cover only the gases the consent lists. We would rather size the system correctly than sell gases you will never report.

Built for Heat and Dust

Raipur’s summers are fierce, and kiln and furnace gas is dusty. Both shorten the life of sampling systems.

No sample line to clog.

The LD500 measures across the duct with no sample extraction or conditioning.

Electronics away from the heat

On System 400 and AR650, optical fibre links the stack optics to an analyser in a cooled shelter.

Fewer parts to wear.

Non-contact optical measurement leaves less exposed to abrasive dust.

Calibration without a long drive.

Nevco has delivered System 400 analysers with a remote calibration facility at Tata Steel Long Products in Joda.

Proof From Cement, Sponge Iron and Power

Nevco’s projects do not yet include a stack installation in Chhattisgarh. These come closest to Raipur’s industry:

Birla Corporation.

Emission monitoring for particulates, SOx and NOx, plus effluent monitoring, for a cement maker, matching the Baloda Bazar belt.

Tata Steel Long Products (formerly Tata Sponge Iron), Joda

Three System 400 online SO₂ analysers with remote calibration, from the sponge iron sector.

NALCO, Angul.

Boiler stack monitoring at a 1,200 MW captive power plant.

Petcoke calciner and carbon plant.

System 400 measuring SO₂, NOx and NH₃ in corrosive gas with more than 40% moisture.

Nevco’s client list includes SAIL, NTPC and Jindal, which run major plants in Chhattisgarh, and cement makers UltraTech and ACC.

Nevco is certified to ISO 9001:2015 and ISO/IEC 27001:2013, holds a Best MSME Award, and works with principals including OPSIS, Sintrol and KANE. It has supplied more than 10,000 flue gas analysers in India. Of the four stack gas analysers, the AR650’s page lists TÜV (EN 15267, QAL1), MCERTS and CSIR-NPL credentials.

Our Global Partners

Nevco’s clients include Reliance, Tata Power, Indian Oil, HP, ONGC, GAIL, NTPC, BHEL, Adani, Essar, Hindalco, Vedanta, Jindal, NALCO, SAIL, IFFCO, UltraTech, ACC, Aditya Birla Group, Aarti Industries, Hikal, SRF, Dr. Reddy’s, Hindustan Unilever, Saint-Gobain, Maruti, Toyota, Honda, MRF, Goodyear and Wipro.

Pollution control authorities rely on Nevco too: CPCB, DPCC, TNPCB, PPCB, the MP Pollution Control Board and the Goa State Pollution Control Board are among our clients as well.

Stack, Dust and Boundary Together

Fly ash, coal and uncovered transport drew a large share of CECB’s penalties, and none of them is a stack source. Boundary effects are measured by a continuous ambient air quality monitoring system, stack particulates by dust monitors, and stack gases by the CEMS. Nevco supplies all three, under one AMC and one data system.

How We Run a Raipur CEMS Project

  1. Read the consent. We list each stack and every gas CECB requires.
  2. Survey. We inspect ports, platforms, power, and network, with summer heat in mind.
  3. Install and connect. Each analyser is commissioned and linked to CECB and CPCB.
  4. Maintain. The AMC covers calibration, servicing, and breakdowns, with extra attention in the dry months.

Get a CEMS Proposal for Your Raipur Plant

  1. Send your CECB consent and the list of stacks.
  2. We size each stack for gas, dust or both, and say where a CEMS is not needed.
  3. You receive an itemised quote for equipment, installation, connectivity and AMC.

We are open from Monday to Saturday 10:00 AM - 06:00 PM

Frequently Asked Questions.

Have questions about our systems, compliance requirements, or service offerings? We’ve answered the most common ones here.

How strict has CECB been with Raipur industries?

Between January 2025 and May 2026, CECB’s Raipur regional office issued notices to 94 industries, directed closure or power disconnection for 82, and imposed more than ₹2.4 crore in compensation on 96, according to The Hitavada.

It depends on the CECB consent. Many are regulated mainly on particulates, so a stack dust monitor comes first. Where the consent names CO or SO₂, System 400 in its 400BASIC configuration covers them.

Typically SO₂, NOx and CO, with mercury where required. Kilns that co-process waste usually add HCl, HF and total hydrocarbons, all of which the AR650 lists.

Yes. A 2022 Down To Earth report found CECB receiving regular data from 125 of 167 tracked units, with 468 analysers across 31 industries connected through its IoT network.

System 400 in its 400BASIC configuration, which covers SO₂, NO, NO₂ and CO. Particulates from the furnace are measured separately by a stack dust monitor.

Yes. Nevco delivered emission monitoring for particulates, SOx and NOx, plus effluent monitoring, for Birla Corporation. UltraTech and ACC are also on Nevco’s client list.

Usually not, unless their consent names specific gases. These units are mostly regulated on particulates, which a stack dust monitor measures.

Where the design allows, yes. Nevco has delivered System 400 analysers with a remote calibration facility at Tata Steel Long Products in Joda.

We take on CEMS projects in Siltara, Urla, Borai, Bhanpuri, the Baloda Bazar cement belt and other industrial areas of Chhattisgarh, with AMC support.

Send your CECB consent, a list of stacks and their gases, and the power and network on site. We quote per stack, and tell you where dust monitoring alone will do.